PCB Bezel surround mount for 0.96″ OLED 128X64 SSD1306 Display Module

£6.96£8.96

This bezel makes your Arduino, Raspberry PI or other project look neater and more professional. This bezel has been specifically made to fit the commonly-used 0.96″ OLED 128X64 SSD1306 Arduino Display Module that has a maximum size of 28mm x 28mm (i.e. the size of the display PCB).

This product comes in two different options.
1) Bezel for PCB mounting, where you wish to solder the OLED directly to your PCB
2) Bezel for PCB mounting with a stand-off, where you wish to use a female header socked to connect the OLED to the PCB

 

Clear
SKU: BEOL96P Category:

Description

This product comprises a bezel only, to fit a 0.96″ OLED display. This bezel is designed to be mounted on a PCB, to hold the OLED display.

Description

This Bezel is a custom-made part, machined from Perspex/acrylic sheet. The front of the bezel has a gloss black finish and all other surface have a machined finish. This is not a moulded part.

The OLED display (which is NOT included in this item) is fixed into the rear of the Bezel with adhesive. The Bezel (with the display) is then mounted onto the PCB using the screws provided.

There are two versions of this item:

1) A Bezel with the necessary height for the OLED to be soldered to the PCB

2) A Bezel with an additional stand-off to allow the use of a standard header socket connector (approx 8.5mm high excluding the pins) soldered to the PCB.

Note that you will need your own suitable adhesives to mount the display into the Bezel (we use superglue for this).

This Bezel has been specifically made to fit the commonly-used 0.96″ OLED 128X64 SSD1306 Arduino Display Module with an overall size of 28mm x 28mm (i.e. the total size of the display’s PCB). This Bezel is not designed to fit any other display. Please carefully check the dimensions of your display before buying.

Full instructions are included with the Bezel.

Specifications

Overall size: 36mm x 36mm
Display module size: This Bezel will accept OLED displays up to 28mm x 28mm
Material: Perspex/acrylic
Colour: The front of the Bezel is gloss black, and all other surfaces have a machined finish.
*** This is a machined item using commercial Perspex, so its measurements may vary slightly.

The item includes the Bezel and screws – plus an optional stand-off section if that is what you purchased.

* The OLED module is NOT included with this item. *