Description
Do you want your Arduino or Raspberry Pi project to look more professional?
It is difficult to mount the 0.96″ OLED display in an enclosure or panel without making an untidy hole and using ugly fixing screws.
This display and bezel makes your project look more professional and tidy, by hiding an untidy cut-out and doing away with display mounting screws.
This item is available in various combinations:
- An OLED display with a matched Black, Grey or White bezel
- An OLED display only
We have made the bezels to match the display supplied, so we’ve made it easy to buy the matched pair. The display is an IIC (I2C) SSD1306 0.96″ OLED display.
We have other bezels for other commonly available OLED displays.
Description
This bezel is a custom-made part, SPECIALLY MACHINED from Perspex/acrylic. The front of the bezel has a nice gloss finish, and all other sides and edges have a machined finish. This is not a moulded part, nor a low-quality 3D-printed part.
Note that the bezel is not certified as moisture or dust proof. The OLED display is fixed into the rear of the bezel with adhesive. The bezel is fixed into your panel or enclosure and fixed with adhesive (not supplied).
Full instructions are included with the bezel and display.
Bezel Specifications
Overall bezel size: 32.4mm x 32.4mm
Material: Perspex/acrylic
Colour: The front of the bezel is gloss black, grey or white. The sides and rear of the bezel have a machined finish.
The bezel thickness is nominally 5mm to 6mm depending upon colour selection
*** This is a custom-machined item, so its measurements may vary slightly.
Adhesives are also NOT included.
