Bezel to fit Adafruit module with ILI9341 TFT

This bezel was designed as a custom part, to fit an Adafruit display module with ILI9341 TFT. The Display Module is NOT included in this item.

There are two variants of this bezel:

1. A bezel that fits around the PCB of the Adafruit display. This has screw fixings that hold the display’s in place by its PCB. If you have the Adafruit display shown in the photo, this will probably be the most suitable option. Note, the bezel will ONLY fit the “Adafruit 2.8″ TFT Touch Shield v2 – Capacitive or Resistive“.  Please carefully check the photo of the display to make sure it 100% matches your display.
2. A bezel that only fits around the ILI9341 TFT. This bezel may be suitable for other modules that use the ILI9341 TFT display. This does not have any specific fixing points for the display so you will have to adapt your project to accommodate the display and bezel together, such as mounting the display inside your project so that it’s height matches the bezel.

This bezel is usually made as a custom part, so we don’t usually hold stock. If you need this part (and we are not showing available stock), or have a requirement for any custom bezel part, please contact us using this link.

We do not, in anyway whatsoever, endorse or recommend any other company. Only for the sake of completeness and proper attribution, and to allow you to research supply options, we want to mention that the display module used to design this bezel is the “Adafruit 2.8″ TFT Touch Shield v2 – Capacitive or Resistive”.

You may be able to obtain this or similar display modules from other suppliers that utilise the ILI9341 TFT display.