Description
All displays need mounting, so why not mount your display in a professional-looking Bezel?
This item is available as:
- A Bezel only (no display)
- A Bezel with matched display
The bezel hides an untidy cutout in your project box or panel, and does away with visible mounting screws! The bezel overlaps your cut-out all round for a tidy finish.
It is machined from glossy black acrylic so it looks great! It is NOT a cheap 3D-printed item.
The bezel has been specifically designed for the 1.3″ 240×240 IPS display module shown in the images, with dimensions of:
- PCB size: approx 28mm x 39.3mm x 1.6mm thick
- Overal LCD sub-module size: approx 26.2mm x 29.2mm
- Overall display thickness: approx 4mm
- It is unlikely the bezel will fit any other 1.3″ display
Your display is mounted into the bezel with 4 screws. The bezel is affixed into the project box or panel with adhesive.
Full instructions are included with the item.
Note – this bezel is unlikely to fit other 1.3″ TFT displays. Common 1.3″ TFT displays have small mounting holes with screw holes at different positions. Therefore, the bezel’s screws holes may not match to the displays mounting holes, even though the PCB may fit. If you are not sure if your display will fit, please contact us before buying (or buy the option with the display included).
Dimensions
- Overall size: 34mm x 45.2mm x 5mm (approx 2mm sits on top of the surface and overlaps an untidy cut-out.
- Panel cut-out: 30mm x 41.2mm
*Because this is a machined part, dimensions are nominal and may vary
Notes
- Adhesive is not included
- This bezel is not Ingress Protection certified
- If you are buying the bezel only, please make sure you display will fit. Contact us for help if required.
