Description
Do you want your Arduino or Raspberry Pi project to look more professional?
It is difficult to mount the 0.96″ OLED display in an enclosure without making an untidy hole with fixing screws.
This is a GREY version of our popular OLED bezel, used to mount an SSD1306 128×64 OLED display – the display shown in the photos.
This bezel not only makes your project look more professional and tidy, and also does away with display mounting screws, and hides the edges of the cut-out.
This bezel has been specifically made to fit the commonly-used 0.96″ OLED 128X64 SSD1306 Arduino Display Module that has a maximum size of 28mm x 28mm (i.e. the total size of the display PCB). This bezel will NOT fit any other display. Please carefully check the dimensions of your display before buying.
If your OLED is only 27mm wide (which usually has a black PCB), then you can buy our other black bezel made specifically for that display. See listing 353130172621
Description
This bezel is a custom-made part, SPECIALLY MACHINED from acrylic. The front of the bezel has a nice gloss grey finish, and all other sides and edges have a machined finish. This is not a moulded part, nor a cheap 3D-printed part.
The OLED display (which is NOT included in this item), is fixed into the rear of the bezel with adhesive. The bezel (with the display) is then mounted into a cut-out on your panel or enclosure and fixed with adhesive. No adhesive is included with this bezel.
Full instructions are included with the bezel
Note that the bezel is not certified as moisture or dust proof.
Specifications
- Overall size: 36mm x 36mm
- Display module size: This bezel will accept the specified OLED displays with PCBs up to 28mm x 28mm
- Material: Acrylic
- Colour: The front of the bezel is gloss grey. The sides and rear of the bezel have a machined finish.
*** This is a custom-machined item, so measurements are approximate.
The OLED module is NOT included with this item. Adhesives are also NOT included.
