Bezel for 0.96″ 126×64 SSD1306 OLED display

£6.96

This bezel makes your Arduino, Raspberry PI or other project look neater and more professional. It is specifically designed to accommodate a commonly available SSD1306 display.

This bezel has been specifically made to fit the commonly-used 0.96″ OLED 128X64 SSD1306 Arduino Display Module that has a maximum size of 28mm x 28mm (i.e. the total size of the display PCB). See the gallery images to see the specific OLED. This bezel will NOT fit any other display. Please carefully check the dimensions of your display before buying.

Only 1 left in stock

or
Category:

Description

Do you want your Arduino or Raspberry Pi project to look more professional?
It is difficult to mount the 0.96″ OLED display in an enclosure without making an untidy hole with fixing screws.

This bezel not only makes your project look more professional and tidy, and also does away with display mounting screws. This product comprises a bezel only, to fit a 0.96″ OLED display. This fits the OLED described and may not properly fit other OLEDs.

This bezel has been specifically made to fit the commonly-used 0.96″ OLED 128X64 SSD1306 Arduino Display Module that has a maximum size of 28mm x 28mm (i.e. the total size of the display PCB). This bezel will NOT fit any other display. Please carefully check the dimensions of your display before buying.

If your OLED is only 27mm wide (usually with a black PCB), then you can buy our other bezel made for that display. See listing 353130172621

Description
This bezel is a custom-made part, SPECIALLY MACHINED from 6mm thick Perspex/acrylic sheet. The front of the bezel has a nice gloss black finish, and all other sides and edges have a machined finish. This is not a moulded part.

Approximately 2mm of this bezel will protrude from the front panel/enclosure, and the remaining 4mm will sit inside your cut-out.

The OLED display (which is NOT included in this item), is fixed into the rear of the bezel with adhesive. The bezel (with the display) is then mounted into a cut-out on your panel or enclosure and fixed with adhesive. NO adhesive is included with this bezel.
You will need suitable adhesives to mount the display into the bezel (we use gel-superglue for this) and a suitable adhesive to mount the bezel onto your panel/enclosure.

How to use
Full instructions are included with the bezel. In summary:
After soldering the wires or header pins to the OLED display, the OLED display is mounted into the rear of the bezel with adhesive (we use a “gel superglue” although we have also used epoxy adhesive).
The bezel is then mounted into a suitable cut-out in the panel/enclosure and fixed with adhesive. Please use an appropriate adhesive that will work with the bezel (which is acrylic) and the panel/enclosure you are using.

Please carefully follow the instructions from the manufacturer of your chosen adhesives.

Note that the bezel is not certified as moisture or dust proof, and the display module is directly behind the viewing window without an intermediate clear window.

Specifications
Overall size: 36mm x 36mm
Panel cut-out 32mm x 32mm
Display module size: This bezel will accept the specified OLED displays up to 28mm x 28mm
Display window: 24mm x 13mm, positioned to work with the specified OLED display module.
Total height/thickness: 6mm
Height of bezel when mounted: 2mm above the surface of the panel/enclosure front
Material: Specially machined from 6mm thick Perspex/acrylic
Colour: The front of the bezel is gloss black. The sides and rear of the bezel have a machined finish.

*** This is a custom-machined item, so its measurements may vary slightly.

The OLED module is NOT included with this item. Adhesives are also NOT included.