Description
Do you want your Arduino or Raspberry Pi project to look more professional?
It is difficult to mount these terrific 0.85″ TFT displays in an enclosure without making an untidy hole and using visible fixing screws.
This bezel not only makes your project look more professional and tidy, it also does away with visible display mounting screws. The bezel front overlaps the cut-out hole to hide untidy edges.
This bezel has been specifically made to fit the 0.85″ TFT 128×128 display as shown in the image, with a PCB of approx 21.9mm x 29.4mm. It will not fit any other TFT display. Please carefully check your display before buying.
Description
This bezel is a custom-made part, SPECIALLY MACHINED from acrylic. The front of the bezel has a nice gloss black finish, and all other sides and edges have a machined finish. This is not a moulded part, nor a cheap 3D-printed part.
The TFT display (which is NOT included in this item), is fixed into the rear of the bezel with adhesive. The bezel (with the display) is then mounted into a cut-out on your panel or enclosure and fixed with adhesive. No adhesive is included with this bezel. No ugly screws required!
Full instructions are included with the bezel.
Note that the bezel is not certified as moisture or dust proof.
Specifications
- Overall size: 28mm x 35.5mm
- Material: Smooth Acrylic – not a rough-looking 3D printed part!
- Colour: The front of the bezel is gloss black. The sides and rear of the bezel have a machined finish.
*** This is a custom-machined item, so measurements are approximate.
The TFT module is NOT included with this item. Adhesives are also NOT included.
