Description
Do you want your Arduino or Raspberry Pi project to look more professional?
It is difficult to mount the TM1637 clock displays in an enclosure without making an untidy hole with ugly fixing screws! The TM1637 clock displays are also quite tall so its tricking to get a flush finish without awkward spacers etc.
This bezel solves these problems and makes your project look more professional and tidy. It does away with messy display mounting screws and the need for spacers. And it hides an untidy and ugly cut-out.
A High Quality Acrylic Part
This is a HIGH QUALITY part with a flat, very smooth, high-quality glossy surface, made from hard acrylic. This is NOT a low-quality 3D print (3D printed parts are typically made of soft, low-melting point plastic and have a rough, poor quality finish. Some 3D printer materials also do not accept adhesive making them difficult to use).
Our acrylic bezels will make your project look more-professional and give a quality touch to projects, and they are easy to use.
The front of the bezel has a nice high-gloss black finish. All other surfaces and edges have a machined finish. This is not a moulded part, nor a cheap 3D print.
The bezel is designed so that the display character show in the centre of the bezel.
The TM1637 4-Digit LED Display Clock Display (included in this item), is pre-fixed into the rear of the bezel. This bezel has been specifically made to fit the display provided. It may not fit other displays. All displays are tested before dispatch.
The bezel with the display is fixed into your panel or enclosure with adhesive (not included).
Full instructions are included with the bezel.
Note that the bezel is not certified as moisture or dust proof.
Overall size: 53.4mm x 33mm
Material: Perspex/acrylic.
Colour: The front of the bezel is high-gloss black. All other surfaces have a machined finish.
*** This is a machined item, so its measurements may vary slightly.
LED display module
This display supplied is a commonly available LED clock display, and display libraries and tutorials are widely available.
Display common anode, 0.36” four numbers with centre colon (as a clock display)
We usually ship red LED displays, with brightness adjustment by software
We test ALL displays before shipping, so we know they work and fit properly in our bezel.
