Bezel with 0.91 inch 128×32 SSD1306 OLED display or Bezel only

£5.50 – £9.50

This item is a new design, replacing our previous 0.91″ OLED bezels.

0.91″ OLED displays don’t have mounting holes or any way to hold them in position. Our bezels will hold the display, allowing you to mount the display into your project box or panel.
This bezel hides an untidy cut-out and does away with visible mounting screws. Making your project look more professional.

Choose from one of these options:

  • Bezel with a matching OLED display
  • Bezel only
SKU: BEOL91C Categories: , , ,

Description

This item is a new design, replacing our previous 0.91″ OLED bezels.

0.91″ OLED displays don’t have mounting holes or any way to hold them in position. Our bezels will hold the display, allowing you to mount the display into your project box or panel.
This bezel hides an untidy cut-out and does away with visible mounting screws. Making your project look more professional.

This bezel is NOT a low-quality cheap 3D-print. It is a high-quality item machined from high-gloss black acrylic.

What is included

This item includes a Bezel, 2 clips, 4 screws and 0.91″ OLED display (if you purchase that option).

The Bezel

This bezel is a custom-made part, machined from glossy black acrylic. The front of the bezel has a nice gloss black finish, and all other sides and edges have a machined finish. This is not a moulded part, and is not a cheap 3D-print.

The OLED display

This is a commonly available 0.91″ 128×32 SSD1306 display with a 4-pin I2C interface.All displays are tested before shipping, so we know they work and fit the bezel. The bezels are made to fit the display we provide. If you are buying the ‘Bezel only’ option, please check that the display is the same as the one we show and specify in this listing.
The OLED display colour varies with supply, but we usually ship white OLEDs.

We test 100% of our displays before shipping, so you can buy with confidence.

The OLED display is fixed into the rear of the bezel with two retaining clips. The bezel is fixed into your panel or enclosure with adhesive (not supplied).
Full instructions are included with the bezel.

Note that the bezel is not certified as moisture or dust proof.

Specifications

  • Overall size: nominal 47mm x 24.4mm
  • Panel cut-out 43mm x 20.4mm
  • These bezels are designed to fit OLED displays with a thickness of approx 2.5mm
  • Material: Acrylic
  • Bezel colour: The front of the bezel is gloss black. All other surfaces have a machined finish.
  • OLED display colour: This varies with supply, but we usually ship a white OLED

*** This is a machined item, so its measurements may vary slightly / approximate.

Related products