Description
Do you want your Arduino or Raspberry Pi project to be more professional?
This Panel comprises a great-looking glossy black Bezel, a 128×64 SSD1306 OLED display, and a 5-way joystick module with a custom button cap. This helps you make a pro-looking interface for your project whilst minimising the control footprint.
In the past, it was difficult to mount the 0.96″ OLED display in an enclosure or panel without making an untidy cut-out and using ugly fixing screws. This panel tidies your project, by hiding an untidy cut-out and doing away with front mounting screws. The front face of our bezel overlaps your cut-out by 2mm all round.
We have designed the Panel to match the display we supply, and all displays are tested before dispatch. You can buy in confidence that you are getting a matched product set.
Included
This product includes a Panel Bezel, a matched and tested OLED display, 5-way joystick module with a custom button cap, 6 fixing screws, and instructions. The custom button cap is pre-attached.
The panel bezel
This bezel is a custom-made part, SPECIALLY MACHINED from Perspex/acrylic. The front of the bezel has a nice gloss finish, and all other sides and edges have a machined finish. This is NOT a molded part, nor is it a low-quality 3D-printed part. The Panel fits the display and joystick module provided.
The display
The display is a IIC (I2C) SSD1306 0.96″ OLED display. We usually provide a white display, but please check with us before buying if you need something specific.
How to use
The OLED display and joystick module are fixed into the rear of the bezel with the screws provided. The assembly is fixed into your panel or enclosure using suitable adhesive (not supplied).
Full instructions are included.
Panel Bezel Specifications
Overall bezel size: 51.4mm x 33.1mm
Panel cut-out: 47.4mm x 29.1mm
Material: Perspex/acrylic
Colour: The front of the bezel is high-gloss black. The sides and rear of the bezel have a machined finish.
The bezel thickness is nominally 6mm, but please note that stock acrylic has a wide thickness tolerance. The screw heads etc add additional overall depth.
The bezel is not dust or moisture proof, and it does not have IP certifications.
** This is a custom-machined item, so its measurements may vary slightly.
** Adhesives are also NOT included.
We test 100% of our displays before dispatch
