Description
Do you want your Arduino or Raspberry Pi project to look more professional?
It is difficult to mount the 0.96″ OLED display in an enclosure without making an untidy hole with fixing screws.
This bezel not only makes your project look more professional and tidy, and also does away with display mounting screws. This product comprises a bezel only, to fit a 0.96″ OLED display. This fits the OLED described and may not properly fit other OLEDs.
This bezel has been specifically made to fit the commonly-used 0.96″ OLED 128X64 SSD1306 Arduino Display Module that has a maximum size of 28mm x 28mm (i.e. the total size of the display PCB). This bezel will NOT fit any other display. Please carefully check the dimensions of your display before buying.
If your OLED is only 27mm wide (usually with a black PCB), then you can buy our other bezel made for that display.
Description
This bezel is a custom-made part, SPECIALLY MACHINED from Perspex/acrylic. The front of the bezel has a nice gloss black finish, and all other sides and edges have a machined finish. This is not a moulded part, nor a low-quality 3D-printed part.
The OLED display (which is NOT included in this item), is fixed into the rear of the bezel with adhesive. The bezel is fixed into your panel or enclosure and fixed with adhesive (not supplied).
Full instructions are included with the bezel
Note that the bezel is not certified as moisture or dust proof.
Specifications
Overall size: 36mm x 36mm
Display module size: This bezel will accept the specified OLED displays up to 28mm x 28mm
Material: Perspex/acrylic
Colour: The front of the bezel is smooth glossy white. The sides and rear of the bezel have a machined finish.
*** This is a custom-machined item, so its measurements may vary slightly.
The OLED module is NOT included with this item. Adhesives are also NOT included.
