This item is available in two different bundles:
- A Bezel with a 5110 LCD
- A Bezel only
The bezel is a custom-made part. The front of the bezel has a nice gloss black finish and all other surfaces and edges have a machined finish. This is not a moulded part, and is made especially for the 5110 LCD shown in the listing images (which is a standard, commonly available part).
The bezel is made so that the LCD display shows in the centre/middle of the bezel, so it looks nice!.
An LCD display is fixed into the rear of the bezel and held in place with 4 screws (supplied). The bezel with display is then mounted into a cut-out in your panel or enclosure. The LCD is also supplied with an 8-pin header.
Note that you will need suitable adhesives (not supplied) to secure the bezel onto your panel/enclosure.
This bezel has been specifically made to fit the 5110 LCD display module shown in this listing. This bezel will NOT fit any other display module. We optionally supply a bundle comprising the Bezel + LCD to ensure a good fit and match for you to be happy with the result.
Every LCD we ship is tested before shipping, so we know it works and fits into the Bezel.
Note that, like most 5110 LCDs, the display operates at 3.3V max.
How to use
Full instructions are included with the bezel. In summary:
- After soldering the wires or header pins to the 5110 display, the display is mounted into the rear of the bezel and secured with the 4 screws supplied. Do NOT over tighten the screws.
- The bezel is then mounted into the panel/enclosure with adhesive. Please use an appropriate adhesive that will work with the bezel (which is acrylic) and the panel/enclosure you are using.
- Please carefully follow the instructions from the manufacturer of your chosen adhesives.
Note that the bezel is not certified as moisture or dust proof, and the display module is directly behind the viewing window without an intermediate clear window.
- Parts included: Bezel, 4 screws, 8-pin header. The 5110 LCD is optional, if you buy that bundle.
- Overall bezel size: 53mm x 59mm
- Panel cut-out for bezel 49mm x 55mm
- This bezel will fit the LCD shown (or supplied) or your own identical LCD module.
- Display opening: 33mm x 25mm, positioned to work with the above LCD supplied.
- Overall Bezel height/thickness: 6mm
- Height of bezel when mounted: 2mm above the surface of the panel/enclosure front
- LCD’s PCB thickness: approx 1.1mm
- Bezel material: Specially machined from acrylic
- Colour: The front of the bezel is gloss black. All other surfaces have a machined finish.
** This is a machined item, so its measurements may vary slightly.
The optional 5110 LCD
- Display resolution: 84 X 48 dots
- Power supply voltage: 2.7V – 3.3V
- IO signal voltage: 2.7V – 3.3V
- Backlight colour: Usually white, although this might vary with supply.
- Backlight voltage: 3.3V max
- The 5110 LCD module is a commonly-available part.