Description
We were asked for a minimal size 128×64 OLED Bezel and here it is!
A High Quality Acrylic Part
This is a HIGH QUALITY part with a flat, very smooth, high-quality glossy surface, made from hard acrylic. This is NOT a low-quality 3D print (3D printed parts are typically made of soft, low-melting point plastic and have a rough, poor quality finish. Some 3D printed materials also do not accept adhesive making them difficult to use).
Our acrylic bezels will make your project look more-professional and give a quality touch to projects, and they are easy to use.
This bezel does away with display mounting screws, and hides an untidy cut-out in your project box.
Our Bezel and matched display
This item comprises a small 128×86 OLED display (IIC/I2C) with a matched bezel. It retains the great advantages of our other OLED Bezels:
- It hides the edges of an untidy cut-out hole
- It removes the need for ugly mounting screws
- It gives your projects a more ‘professional’ finish
- It is NOT a cheap 3D-printed part – it is made in the UK from high quality, glossy black acrylic
The bezel itself is just a tiny bit bigger than the display itself – the extra size being the front-face outer flange to overlap an untidy cut-out.
This item is supplies as a kit – a bezel and a display – you assemble the kit into your project. The display is attached to the bezel using adhesive, and the bezel is attached to your project box or panel also with adhesive.
Adhesive is not supplied (but we ourselves often use a gel-type ‘superglue’).
Details *
- The bezel front is 30.4mm x 30.4mm
- Panel cut-out 26.4mm x 26.4mm
- Overall height: 6mm
- Flange overlap – 2mm all round, and 2mm high from the mounting surface
- The OLEDÂ is a white (on black) display, 128×64 IIC/I2C, 4 pin
* Dimensions may vary a little as this is a machined item
We test 100% of our displays before shipping
