Bezel to fit 0.91″ 128×32 SSD1306 OLED display

£5.75

This design has been updated. This new bezel is thicker, and has an updated clip.

This bezel makes your Arduino, Raspberry PI or other project look neater and more professional. It is specifically designed to accommodate a commonly available SSD1306 display. The bezel has a rear attachment clip to hold the display neatly in place.

In stock

SKU: BEOL91A Categories: ,

Description

This design has been updated. This new bezel is thicker, and has an updated clip.

This product comprises a bezel only, to fit a 0.91″ OLED display.

Do you want your Arduino or Raspberry Pi project to look more professional?

It is difficult to mount the 0.91″ OLED display in an enclosure without making an untidy hole with fixing screws.

This bezel makes your project look more professional and tidy, and also does away with messy display mounting screws.

Description

This bezel is a custom-made part, SPECIALLY MACHINED from Perspex/acrylic. The front of the bezel has a nice gloss black finish, and all other sides and edges have a machined finish. This is not a moulded part, nor a low-quality 3D-printed part.

Note that the viewing window is not precisely in the centre of the bezel. This is because we made the bezel to the smallest practical size to fit the 128×32 OLED display.

If you prefer a centralised viewing window, see out other listing (search eBay forĀ 353109136386) which is bigger and comes with a matched OLED.

The OLED display (which is NOT included in this item), is fixed into the rear of the bezel, held with the retaining clip. The bezel is then fixed into the panel or enclosure with adhesive (not included).

Full instructions are included with the bezel

There are a few different types of 128×32 display available. Before ordering this bezel, please check the images to make sure your display will fit this bezel.

This bezel has been specifically made to fit the commonly-used 0.91″ OLED 128X32 SSD1306 Arduino Display Module that has a maximum size of 38.5mm x 12.5mm (i.e. the total size of the display PCB). This bezel will NOT fit any other display. Please carefully check the dimensions of your display before buying.

Note that the bezel is not certified as moisture or dust proof.

Specifications

  • Overall size: 46mm x 22mm
  • Display module size: This bezel will accept OLED displays up to 38.5mm x 12.5mm (overall PCB size)
  • Material: Perspex/acrylic, and the retaining clip is ABS.
  • Colour: The front of the bezel is gloss black. All other surfaces have a machined finish.

*** This is a machined item, so its measurements may vary slightly / approximate.
*** The OLED module is NOT included with this item, nor is any adhesive.