0.96″ 128×64 OLED Display with Bezel (white or black) SSD1306 I2C

£6.96£10.20

This item has been superseded by other products, including this one.

Do you want your Arduino or Raspberry Pi project to look more professional?
It is difficult to mount an OLED display in an enclosure without making an untidy hole with fixing screws.
Adding a bezel makes your project look more professional and tidy, and does away with display mounting screws.

This product comprises a bezel and an matched 0.96″ OLED display.

Clear
SKU: BEOL96BW Categories: ,

Description

Do you want your Arduino or Raspberry Pi project to look more professional?
It is difficult to mount an OLED display in an enclosure without making an untidy hole with fixing screws.
Adding a bezel makes your project look more professional and tidy, and does away with display mounting screws.
 
You have 4 options in this listing: A white or black Bezel – with or without an OLED display.
 
The bezel is a custom-made part, SPECIALLY MACHINED from Perspex/acrylic. The front of the bezel has a nice high-gloss black finish, and all other sides and edges have a machined finish. This is not a moulded part, NOR a cheap 3D-printed part.
These Bezels fit an OLD display of dimensions: 28mm high and 27mm wide. Those displays usually have a black PCB.
If your display is NOT  28mm x 27mm (i.e. a blue PCB) this bezel will not fit. Check out our other bezel model: Listing  352939498391 for black, and 353046920458 for white.
 
Description
We usually supply OLED displays that have white characters, with these bezels. But the OLED display colour might vary. If you want a specific colour of OLED, please contact to check us before purchasing.
 
The display is a commonly available 128×64 OLED SSD1306 display with a 4-pin I2C interface.
All displays are TESTED before shipping, so we know they work and fit nicely into the bezel.
 
The OLED display (included in this item), is fixed into the rear of the bezel with adhesive. The bezel (with the display) is fixed into your panel or enclosure and fixed with adhesive.
NO adhesive is included with this item.
Full instructions are included with the bezel
 
Note that the bezel is not certified as moisture or dust proof.
 
Specifications
• Overall bezel size: 36mm x 36mm
• OED display module size: 27mm wide x 28mm high (black PCB). The OLED that we supply might vary dependent on our supply.
• Bezel material: Perspex/acrylic
• Colour: The front of the bezel is either high-gloss black or gloss white. The sides and rear of the bezel have a machined finish.
*** This is a custom-machined item, so its measurements may vary slightly.
 An OLED module is included with this item if you selected that option.
Adhesives are also NOT included.